The washing system, Evolution 200, has been exposed. It is considered the Firbimatic’s flagship model providing precision parts cleaning through washing and dryings cycles in a vacuum-sealed chamber.
Evolution 200 uses hydrocarbons or modified alcohols and thanks to its hermetic operation under vacuum it assures the best results in terms of cleaning quality on complex surfaces, inside cavities and blind holes.
The pre-degassing phase of the solvent facilitates the absence of air bubbles and therefore the penetration and homogeneity of the washing.
The drying phase takes place with vacuum at approx. 1 mBar: the pieces come out without any solvent residue that could contaminate the working environment.
The Evolution 200 can remove up to 100 liters of oil daily on the parts to be degreased. The recovered oils can eventually be reused.
The management of filter cleaning, of the basket loading-unloading and of the residual distillation drains, take place automatically without exposure of the operator to residual emissions.
Solvent consumption is a few grams per cycle, when the following operating conditions are strictly observed:
The Evolution can be connected for remote assistance via the Internet and has the basic requirements of INDUSTRY 4.0
Our Washing Solutions are:
The advantages of Firbimatic’s washing systems are:
If you close this banner with a tick or click on "Decline", only technical cookies will be used. If you want to select the cookies to be installed, click on 'Customise'. If you prefer, you can consent to the use of all cookies, including cookies other than technical cookies, by clicking on "Accept all". You can change your choice at any time.